Kipp & Zonen SMP12 Class A Pyranometer

Kipp & Zonen SMP12 Class A Pyranometer
# de producto: 426900
Marca: KIPP___ZONEN
Precio final Contáctenos

ISO / IEC classification

ISO 9060 spectrally flat fast response Class A and IEC 61724-1 Class A monitoring, with ISO / IEC 17025 calibration.

Pioneering Class A pyranometer with integrated solid state heating and no moving parts

Heated dome to prevent dew and frost to achieve all-weather performance

Remote tilt angle and internal humidity monitoring

Tilt sensor to enable remote checks of alignment and humidity monitor provides confidence that the sealing has not been compromised

Enhanced surge protection

Best-in class surge protection conform to EN 61000-6-2 to minimize failure risks, and maintain performance

Minimized maintenance

No desiccant change for 10 years, no moving parts, best MTBF with 5 year warranty, RS-485 connectivity and Modbus® RTU protocol for easy integration with data loggers and SCADA systems

Especificaciones

Classification: Fast response Spectrally Flat Class A (ISO 9060:2018)
Directional Response: ˂ ±10 W/m² (up to 80° with 1000 W/m² beam)
Exactitud espectral: 280 to 3000 nm
Grado de protección IP: IP67
Humedad de operación: 0 to 100 %
Intervalo de mantenimiento y cartucho de secado: Internal, lasts for 10 years, replaced with every recalibration
Longitud de cable: 33, 82, 164 ft (10, 25, 50 m)
Material carcasa: Aluminum, anodized
Maximum Irradiance: 2000 W/m² (Max.)
Non-linearity: ˂ ±0.2% (100 to 1000 W/m²)
Non-stability: ˂ ±0.5 % (change/year)
Peso: 1.1 lb (500 g)
Rango de temperatura de operación: -40 to +70 °C (Storage: -40 to +80 °C)
Salidas digitales: Modbus® RTU over 2-wire RS-485
Spectral Range (50% points): 285 to 2750 nm
Temperature Dependence of Sensitivity: +14 to +104 °F (-10 to +40 °C): ˂ ±1%,
-40 to +158 °F (-40 to +70 °C): ˂ ±2%
Tiempo de respuesta: ˂ 0.15 s (63%), 0.5 s (95%)
Total Zero Offset: ˂ ±3 W/m² (including A & B)
Zero offset A: ˂ ±1 W/m²
Zero offset B: ˂ ±1.5 W/m²